Ponovna Namestitev Optičnega Pogona; Procedure; Post-Requisites - Dell Inspiron 3662 Service Manual

Ponovna namestitev optičnega
pogona
Opozorilo: Preden začnete delo v notranjosti računalnika, preberite
varnostne informacije, ki so bile priložene računalniku, in upoštevajte
navodila v poglavju
končate delo v notranjosti računalnika, upoštevajte navodila v poglavju
končate delo v notranjosti
najdete na domači strani za skladnost s predpisi na naslovu
regulatory_compliance.

Procedure

1 Align and snap the optical-drive bezel to the optical drive.
2 Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
3 Replace the three screws (M2xL2) that secure the optical-drive bracket to the
optical drive.
4 Slide the optical-drive assembly into the optical-drive bay through the front of
the computer.
5 Align the screw hole on the optical-drive assembly with the screw hole on the
chassis.
6 Replace the screw (#6–32 UNC 3.6 mm) that secures the optical-drive
assembly to the chassis.
7 Lift and rotate the side-chassis away from the computer.
8 Connect the data cable and power cable to the optical drive.
9 Rotate the side-chassis towards the computer until it snaps into place.

Post-requisites

1 Replace the front
2 Replace the computer
40
Preden začnete delo v notranjosti
računalnika. Dodatne informacije o varnem delu
bezel.
cover.
računalnika. Ko
www.dell.com/
Ko