Choosing The Alert Type - Uniden CONTAQ 1 ALP 9080 Operating Manual

Choosing the Alert Type

Go to the Alert Set Menu (as shown):
To listen to the tones as you
select them, set Sample Alert
under the Options Menu
on page 19.
1. To cycle through the alert
k
f
types, press or .
2. To store your selection
in memory, press N.
3. To toggle between Auto Reset
(alert tone stops after 8 seconds)
and Non-stop (alert tone
sounds until you press any
k
f
key), press or .
The Silent alert does not use
the Auto Reset or Non-stop
options.
4. To store your selection in
memory, press N.
The standby display returns
showing the audio alert symbol ( a).
13