Using Page/Intercom; 2-Way Paging - Uniden XC3545 Instruction Manual

The 2-Way Page/Intercom feature allows you to communicate between the
Base Unit and Handset. To use this feature remember the following:
The RING ON/BATT SAVE switch on the Handset must be in the
RING ON position.
The BASE UNIT RINGER switch must be set to either LO or HI.
Note: If you are on a call while using the Handset and you page the Base
Unit, the Base Unit will ring even when the Base ringer switch is
set to the OFF position.

2-Way Paging

J
Paging the Base Unit
1. Press
J
Handset.
Note: If there is
K
no answer, press
I
again to
cancel.
2. Press
or on Base
Unit to answer
page.
The IN USE LED
blinks and the
INT'COM LED
lights.
T
To end the
conversation:
3. Press
Handset or
on the Base.

Using Page/Intercom

on
I
on the
3
1
34
2