Uniden WDSS 5335 Series Owner's Manual page 52

Remote Commands
Command
[#] then [1] Repeat a message*
[#] then [2] Play incoming messages
[#] then [3] Skip a message
[#] then [4]
Delete a message
* If you press [#] then [1] in the first four seconds of a message, the system skips to the previous message.
If you press [#] then [1] after the first four seconds of a message, the system repeats the current
message.
5) When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.
Enter another command from the chart within 5 seconds.
6) Hang up to exit the system. The answering system automatically returns to its normal standby setting.
Function Command
[#] then [5]
[#] then [6]
[#] then [9]
[#] then [0]
5
Function
Stop operation
Answering system on
Answering system off
Help