Setting The Time - Uniden EXA 7250 Series Owner's Manual

note
•Normally, the system
will return to standby
if it remains idle for 10
seconds after the or
/volume/select
key is pressed. For

setting the time,

however, the idle time
is extended to two
minutes.
•Press and hold the
or /volume/select
key to quickly scroll
through the numbers
on the display.
[ 1 9 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
Setting the Time
The clock on the cordless phone's answering system starts when power is supplied to the
base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/
clock key.
The system announces "Time," the current time and the
guidance for setting the time.
2) Press the or /volume/select key until the correct
day is announced. The numbers [ ] through [ ] are
displayed on the base.
3) Press the set key to select the day.
4) Press the or /volume/select key until you hear
the correct hour setting. The numbers [ ] through
[ ] are displayed on the base.
5) Press the set key to select the hour.
6) Press the or /volume/select key until you hear
the correct minute setting.
The numbers [ ] through [
base.
7)Press the set key to select the minute.
] are displayed on the
w w w . u n i d e n . c o m