Cisco 6901 Manual page 6

Cisco Unified IP Phone Wall Mount
Figure 7: Mounting the Wall Bracket
Step 2 Attach the phone bracket to the IP Phone.
a) Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached cords
from the base of the phone.
b) Remove the label covers that are concealing the screw holes.
c) Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone ports should
be accessible through the holes in the bracket.
d) Secure the phone bracket to the IP Phone with the Phillips-head screws.
e) Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the clips
incorporated into the phone body.
Cisco Unified IP Phone Wall Mount
6
Cisco Unified IP Phone Wall Mount