Related Documents - Cisco NIM-1T Installing

Installing the Cisco 1-, 2-, and 4-Port Serial Network Interface Modules for Cisco 4400 Series ISRs

Related Documents

Related Topic
Information on the Cisco 4451-X Integrated Services
Router
Information on configuring Cisco 4451-X Integrated
Services Routers
Information about configuring the Cisco 1-, 2-, and
4-Port Serial Network Interface Modules for Cisco
4400 Series ISRs.
Regulatory compliance and safety information
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The
use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only.
Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2014 Cisco Systems, Inc. All rights reserved.
Document Title
Hardware Installation Guide for the Cisco 4451-X Integrated
Services Router
Software Configuration Guide for the Cisco 4451-X Integrated
Services Router
Configuring the Cisco 1-port, 2-port, and 4-port Serial High-Speed
WAN Interface Cards for Cisco 4400 Series ISRs
Cisco Network Modules and Interface Cards Regulatory
Compliance and Safety Information
Installing the Cisco Multiprotocol Synchronus Serial NIM
Related Documents
11