Windshield Washer Fluid - MARUTI SUZUKI Ertiga Tour M Owner's Manual

EXAMPLE
(4)
(4)
71LMT0708
(4) Retainer
4) If the new blade is provided without the
two metal retainers (4), move them
from the old blade to the new one.
EXAMPLE
(A)
(B)
(4)
(A) Up
(B) Down
NOTE:
When you install the metal retainers (4),
make sure the direction of metal retainers
as shown in the above illustrations.
5) Install the new blade in the reverse
order of removal, with the locked end
(4) positioned toward the wiper arm.
Make sure the blade is properly
retained by all the hooks. Lock the
blade end into place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
60MH072
INSPECTION AND MAINTENANCE

Windshield Washer Fluid

EXAMPLE
72RM06004
Check that there is washer fluid in the tank.
Refill it if necessary. Use a good quality
windshield washer fluid, diluted with water
as necessary.
WARNING
Do not use radiator antifreeze solu-
tion in the windshield washer reser-
voir. This can severely impair
visibility when sprayed on the wind-
shield, and also can damage your
vehicle's paint.
NOTICE
Damage may result if the washer
motor is operated with no fluid in the
washer tank.
72RH0-74E
6-32