Troubleshooting
SYMPTOMS
The power is not turned on.
The power is turned off
during the use.
The unit doesn't take pic-
tures after the shutter
button is pressed.
Flash does not work.
Camera is unable to work by
any button or switch.
Problems with the color or
OSD on LCD.
Images cannot be displayed
on TV.
Images can't be downloaded
by USB.
72
CORRECTION
• Turn on the unit.
• Replace the batteries.
• Connect to DC power
• Replace the batteries.
• Do not remove the CF card when
power on.
• Connect the adapter properly
when use it.
• Set it to record mode.
• Format the memory media.
• Replace the batteries.
• Turn on the unit.
• Change to the correct flash mode.
• Remove the batteries and insert
them again.
• Remove the batteries and insert
them again
• Check connections to the camera
and TV.
• Check the connections.
• Make sure it is turned on.
• Replace the batteries or use the
adapter properly.
• Install the right driver software.