Blue Rhino SkeeterVac CPSV002704 Owner's Manual page 10

Maintenance
CPSV002704
Model#
Routine Maintenance – Keeping Air
Passages Clear
For your mosquito exterminator to operate properly,
the vacuum fan must function without restriction.
It is important to check for freedom of operation
and to clean the fan to prevent any possibility of
blockage or restriction. If the fan is blocked and
left blocked for several days or more, the warmth
from operation can seriously damage the unit.
To Inspect
Perform every 2 days when in operation.
Tools Required: Flashlight
1. Remove rain cover, FineTune
2. Check vacuum path around appliance by
pointing flashlight into the gap between cover
and black engine body. See illustration 1.
3. Check fan area by pointing flashlight beam
through center of engine cover into fan area.
See illustration 2.
4. If passages are clear and fan is operating
®
properly, replace FineTune
cover. If not, clean.
To Clean
Perform whenever there is enough build-up to
slow or stop fan operation.
Tools Required: Phillips screwdriver and/or
pliers, cleaner, cloth, plastic knife.
1. Safety First! – Shut engine OFF by
turning gas tank valve to CLOSED position.
Disconnect regulator from tank by turning
black knob counterclockwise. Wait for engine
to cool to the touch.
1
2
®
ring and lure.
ring, lure and rain
Windex® is a registered trademark of S.C. Johnson & Sons, Inc.
Page 8
Page 8