Installing The Stand; Assembling The Cables - Samsung 6 Series Quick Setup Manual

Installing the Stand

Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the
N
screws. Applicable to models (32inch models) only.
. Attach your LCD TV to the stand.
Two or more people should carry the TV.
N
Make sure to distinguish between the front and back of the stand when
N
assembling them.
To make sure the TV is installed on the stand at a proper level, do not apply
N
excess downward pressure to the upper left of right sides of the TV.
. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the
N
LCD TV placed down, it may lean to one side.

Assembling the Cables

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
English - 
Back
Front
Front
Back
Position 2
Position 1