Advertisement
5.4 Hands-free Calling
Whilst connected to your mobile phone, the EP650 will act as a
hands-free system for calls.
Press
to pick up or hang up a call. Press and hold
seconds to reject the incoming call..
During a call, double press
headphones and your mobile phone.
5.5 Audio-In
To use the EP650 as a pair of wired headphones, use a 3.5mm
audio cable to connect the EP650 to your source device. Once the
audio cable is connected to the EP650, the device automatically
switches to wired mode.
6. Charging
When the power is low, the status LED flashes red.
To charge the EP650, connect the micro USB lead to the device's
power socket, and the other end of the USB cable to a powered
USB
port. The status LED constantly lights red whilst charging and
lights
blue once the battery is fully charged.
Note:
1) When charging the EP650, ensure that the output voltage from
the USB port or charger is 5V. Using a voltage greater than 5V
may damage the headphones.
2) Please fully charge the EP650 before the first use or if left
unused for a long period of time.
3) If you are using a smart USB charger, use the common USB
port, ensuring that the output voltage is 5V.
for 2
to transfer the call between the
-7-
7. Specification
Bluetooth Specification
Operating Range
Frequency Response
Support Profile
Speaker Output
SNR
Distortion
Battery
Charging Voltage
Charging Current
Working Time
Charging Time
Standby Time
Weight
Dimensions
Bluetooth v4.1 and aptX
Up to 10m
60Hz – 20KHz
HSP/HFP/A2DP/AVRCP
30mW
≥85dB
≤1.0%
3.7V/220mAh Built-in
Li-Polyme Battery
5V DC
1A
10 hours
2 Hours
30 Days
235g
176.6 x 188.6 x 71mm
-8-
Advertisement
