Table of Contents
Advertisement
Steps
1. Place the I/O board on the palm-rest and keyboard assembly.
2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3. Replace the single screw (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
4. Connect the USH cable (optional) to the I/O board and close the latch to secure the cable.
5. Connect the coin-cell battery cable to the I/O board and adhere the coin-cell battery.
6. Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
7. Lower the left-display hinge.
8. Replace the two screws (M2.5x5) and (M2.5x4) that secure the I/O board to the palm-rest and keyboard assembly.
Next steps
1. Install the
GPU
fan.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
after working inside your
computer.
Disassembly and reassembly
43
Hide quick links:
Advertisement
Table of Contents
