Download Print this page

Connevans fmGenie system How To Use

Hide thumbs Also See for fmGenie system:

Download this manual

Connevans fmGenie system

This is the transmitter:

On the back of the transmitter

the switch should be set to 'LR'

for use with a cochlear implant

Page 1 Connevans fmGenie system Connevans fmGenie system This is the transmitter: On the back of the transmitter the switch should be set to ‘LR’ for use with a cochlear implant...
Page 2 This is the receiver: On the back of the receiver the switch should be set to ‘HI’ for use with a cochlear implant...
Page 3 The fmGenie System – How to use it A few important points in relation to using fmGenie with a cochlear implant. 1. On the back of the transmitter the range switch should be set at LR (long range) 2. On the back of the receiver set it to HI (When this is selected you will see a headphones symbol on the display).
Page 4 • If the tuning is enabled it is possible to set the transmitter channel using the UP/DOWN however the transmitter channel is usually locked by disabling the tuning (switch 4 underneath the flash DOWN) • If you want to mute the microphone on the transmitter, press the star button once.
Page 5 • To select the default channel, you can press both the up and down arrow at the same time while the triangle is flashing. • For information on how to autotune the receiver and transmitter so that the frequency of one coincides with the frequency of another, go to page 36 of the user guide which is available on •...