D-Link DIS-200G Series Hw Installation Manual page 2

DIS-200G Series Layer 2 Gigabit Industrial Smart Managed Switch Hardware Installation Guide
Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written
permission of D-Link Corporation, is strictly forbidden.
Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are
registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or
their products. D-Link Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
© 2018 D-Link Corporation. All rights reserved.
March, 2018
SFP (Mini-GBIC), XENPAK, and XFP Regulatory Compliance
Networks pluggable optical modules meet the following regulatory requirements:
•
Class 1.
•
IEC/EN60825-1:2007 2nd Edition or later, European Standard
•
FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA and CDRH requirements.
•
Application of CE Mark in accordance with 2004/108/EEC EMC Directive and the 2006/95/EC Low Voltage Directives.
•
UL and/or CSA registered component for North America.
•
47 CFR Part 15, Class A when installed into products.
ii