Listen To Fm Radio; Reconnecting Bluetooth - 3M PELTOR WS ALERT XP Series Manual

LISTEN TO FM RADIO

Search station (fig. 8)
Short press (1 s) the Menu button [M] to enter search station
mode. Short press (1 s) the [ + ] or [–] button to initiate a
search. The radio station frequency will be confirmed by a
voice message.**
SMART TIP: If you short press (1 s) the Menu button [M], you
will always start the FM radio.
NOTE: Radio reception depends on the topography and the
environment you are in. If the reception is poor, try to change
area if possible.
Store station (fig. 9)
Short press (1 s) the Menu button [M] three times, voice
message "Store station". Short press (1 s) the [ + ] or [–] button
to select position. Long press (2 s) the Menu button [M] to
store the station. A voice message will confirm "Confirmed".
Preset station (fig. 10)
Short press (1 s) the Menu button [M] two times to enter the
preset station mode. A voice message will confirm "Preset
station". Short press (1 s) the [ + ] or [–] button to browse and
select preset station. The radio station frequency will be
confirmed by a voice message.
3M™ CONNECTED EQUIPMENT, Mobile application **
Connect your "WS™ ALERT™ XPI Headset" with the "3M™
Connected Equipment" mobile application supporting both
Android and iOS. When connected to the mobile application
you will have access to settings, configurations, user
instruction etc.
NOTE: For more information go to the "App Store" or "Google
Play" and download the "3M™ Connected Equipment"
application. For support on the 3M™ Connected Equipment",
please see information in the mobile application.
Bluetooth Multipoint technology **
®
This headset supports Bluetooth
Bluetooth Multipoint technology to connect your headset to
®
two Bluetooth devices at the same time. Depending on the
®
type of Bluetooth devices connected and their current
®
activities, the headset controls the Bluetooth
different ways. The headset prioritizes and coordinates
activities from the connected Bluetooth
Pairing a Bluetooth device (fig. 2, fig. 5)
®
The first time the headset is powered on, it automatically
enters pairing mode. A voice message confirms, "Bluetooth
pairing on". Pairing mode can also be entered from the menu.
This is necessary for pairing a second device (fig. 6).
See "Configuring your headset".
Make sure that Bluetooth communication is activated on
®
your Bluetooth device. Search and select "WS ALERT XP"
®
or "WS ALERT XPI" on your Bluetooth
message confirms when the pairing is complete, "Pairing
complete" and "Connected".
Multipoint technology. Use
®
devices in
®
devices.
®
device. A voice
®
** 3M™ PELTOR™ WS™ ALERT™ XPI Headset
NOTE: You can always stop the pairing process by a long
press (2 s) on the Bluetooth
NOTE: Only one of the two paired devices can be a two-way
radio. ** The headset only supports two-way radio with
3M™ PELTOR™ Push-To-Talk protocol. If you have any
questions, please contact your local distributor.
NOTE: When a 3rd Bluetooth
of the previous paired devices is removed from the headset. If
one of the devices is connected, the unconnected device is
removed. Otherwise, the 1st paired device is removed. **

RECONNECTING BLUETOOTH

When the headset is powered on, it tries to reconnect to all
paired devices during 5 minutes. A voice message will confirm
the connection "Connected".
NOTE: If the link is lost, the headset will try to reconnect
during 30 seconds. A voice message will inform you if you get
link loss, "Disconnect".
Connected and operating one phone.
Connected and operating two phones. ** (see fig. 7)
Bluetooth
®
button
No activity
Streaming
Incoming call
Outgoing call/Call
in progress
Short press
Call in progress
on one phone,
incoming call on
second phone **
No activity/
Streaming
Incoming call
Long press
Call in progress
®
Call in progress
on one phone,
incoming call on
second phone **
button [ ] (fig. 7).
®
device is successfully paired, one
®
DEVICES
®
State Action
Voice control Play **
Voice control Pause **
Answer
End call
End ongoing call,
answer incoming
call **
Call the last dialed
number
Voice control on the
last paired device **
Reject
Toggle call between
phone/headset
Reject incoming call
EN
4