Lae Electronic Control; Change “Set Point” - True T-35 Installation Manual

Info/Set Point
Button
HOW TO CHANGE THE "SET POINT"
May need to unlock control.
WHY:
THE SET POINT IS THE TEMPERATURE AT WHICH THE
COMPRESSOR WILL SHUT OFF.
Please note that the "set point" IS NOT the cabinet
holding temperature.
HOW:
A. To see the set point, press and hold the info button.
See image 1.
B. While still holding the info button While still holding the info button
press the up press the up press the up
the "set point".
C. Once the "set point" has been set correctly release the
info button info button . .
Th e display will show temperature. See image 2.
18

LAE Electronic Control

Manual Defrost/
Down Button
, ,
or down or down or down button to change button to change button to change
............ www.truemfg.com ............
True Food Service Equipment, Inc.
Manual Activation/
Up Button
LAE Control Icons
Compressor
Running
Evaporator Fan
Running
Cabinet in Defrost
Activation of 2nd
Parameter Set - NA
Alarm - NA
Stand-By
Button
1
2
18