Advertisement
Elephant
(2 pieces)
3
• Fit the front and back of the elephant together.
4
• Insert two screws into the upper holes in the
back of the elephant and tighten.
IMPORTANT! Do not insert screws into the
lower holes in the back of the elephant. The
bottom of the elephant will be fastened in
step 7.
Assembly
5
• Fit the elephant onto the base.
Hint: The elephant is designed to fit onto the
base one way. If it does not seem to fit, turn it
around and try again.
6
• Insert one screw into the elephant and tighten.
4
FRONT VIEW
Advertisement
