Channel Level Controls; Master Control - YORKVILLE EXM70 Service Manual

1. Channel 1 Input
The combi-jack is for a mic
(XLR) or a balanced line level
(1/4-inch) source. 24V phantom
power is present on the XLR
portion of the jack.
2. Channel 2 Input
The combi-jack is for a mic (XLR) or an
instrument (1/4-inch). 24V phantom power
is present on the XLR portion of the jack.
3. Channel 3 Input
The XLR jack is for a mic, the 1/8-inch
phone jack for media players and the
Bluetooth™ for streaming audio. 24V
phantom power is present on the XLR
input of the jack.
Note: When Bluetooth™ is used the
volume is controlled by Channel 3's
Level control.
4. Bluetooth™
Bluetooth™ operating range is rated 10
meters (33 feet). The quality of the link
can be affected by an excess of traffic in
the 2.4 GHz bandwidth or obstructions.
Pairing
For 'Pairing' depress the Enable Button for
4 seconds and then release.
1
I N P U T S
1
Mic/Line
2
2
Mic /
Instrument
3
3
Mic /
TM
Bluetooth
3
http://www.yorkville.com/manuals/
EXM 70
Status
Slow blinking indicates pairing mode
while fast blinking indicates an available,
unpaired connection. A steady (solid)
blue light indicates it's paired and audio is
available to Channel 3.

5. Channel Level Controls

The Level controls adjust the channel gain
over an 85 dB range. Use these controls to
adjust each channel's volume in the overall
system mix. The LED indicates clipping.
6. Channel Shape Controls
Setting this control towards 'Music' shapes
the response to be suited for reproducing
prerecorded music while setting the control
towards 'Speech' accentuates the mid-
frequencies which help speech and vocals.
The response is flat in the center position.
7. Channel Effects Controls
This control determines how much of
the selected effect is applied to the
corresponding channel.
L E V E L
EFFECTS
Clip
SHAPE
- +
Music Speech
EFFECTS
Clip
SHAPE
- +
Music Speech
EFFECTS
Clip
SHAPE
- +
Music Speech
Line
Pair ing :
Hold for 4 seconds
and then release.
To get the full Owner's Manual please visit our website at
QuickStart-EXM70-00-1v1 • March 13, 2018
7
6
5
4
or, if you need a printed version call 905-837-8777
Printed In CANADA
Bluetooth
TM

8. Master Control

The Master Control is used to
set the overall level of the Yor-
kville EXM70.
9. Effects Selector
Three effects are available with this
control, as well as an off (no-effects)
position. The effects are Delay,
Hall Reverb and Room Reverb. The
selected effect is available to all 3
input channels and the amount of
effect applied is controlled by the
individual channel's effects knob.
10. Link Jacks
The Link jacks are used to connect multiple
EXM70 systems and/or a subwoofer.
The jacks are in parallel, both a male
and female XLR to help make it more
convenient to 'link' enclosures together. To
use the Link feature, insert a standard XLR
patch cable between cabinets.
11. Pole Mount
The built in pole stand adapter and can
use a standard Yorkville pole-mount
speaker stand.
8
MASTER
9
Room
Hall
Delay
Off
EFFECTS
10
LINK
LINK: Used for
connecting inputs
when LINKing
to other powered
speaker cabinets.