Advertisement
Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Condensation container
Ambient temperature
Connection voltage
Connected load
Fuse protection
Product number
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Residual moisture in the
Fabrics/programmes
fabrics after spinning
Algodón/Algodão
(Cottons) 7 kg
Seco para guardar
1400 rpm
(Cupboard Dry)*
1000 rpm
800 rpm
Seco
(Iron Dry)*
1400 rpm
1000 rpm
800 rpm
Sintéticos (Synthetics) 3.5 kg
seco para guardar
800 rpm
(Cupboard Dry)*
600 rpm
* Programme setting for testing in accordance with applicable standard EN61121.
** The values may differ from those specified, depending on the type of fabric, composition of
laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded.
Fabrics/programmes
Drying time
Algodón/Algodão
(Cottons) 7 kg / 3.5 kg*
Seco para guardar
94 min / per cycle
(Cupboard Dry)***
***Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
11311
to save space. The dryer must be fastened on the washing machine with this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult the
after-sales service or your specialist retailer.
Platform
WMZ
For easier loading and unloading. The basket contained in the drawer can be used to carry
20500
the laundry.
60 x 60 x 85 cm
approximately 35 kg
7 kg
approx. 4.2 l
5 - 35 °C
220 - 240 V
2025 / 2600 W
10 A / 16 A
Rating plate or inside of the door
(The value on the label is achieved at the maximum heat setting.)
Drying time**
consumption**
10 A
16 A
10 A
(50%)
121 min
104 min
3.73 kWh
(60%)
144 min
123 min
4.40 kWh
(70%)
170 min
139 min
5.03 kWh
(50%)
94 min
77 min
2.75 kWh
(60%)
112 min
95 min
3.30 kWh
(70%)
130 min
111 min
3.85 kWh
(40%)
42 min
40 min
1.16 kWh
(50%)
53 min
45 min
1.45 kWh
Annual energy consumption
527 kWh / per year
(from after-sales service using order number)
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed after-sales service directory, or by
calling one of these numbers:
– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Stop ( Off) and remove the appliance plug from the socket.
The Inicio/Stop (Start/Stop)
indicator light does not come on.
The display panel light and
indicator lights (depending on
model) go out and the Inicio/Stop
Energy
(Start/Stop) indicator light flashes.
The Vaciado de depósito/Limp.
16 A
/
(Container/Clean) indicator
light comes on.
3.73 kWh
The Vaciado de depósito/Limp.
4.40 kWh
/
(Container/Clean) indicator
5.03 kWh
light is flashing.
2.75 kWh
Dryer does not start.
3.30 kWh
3.85 kWh
Programme stops shortly after it
has started.
1.16 kWh
Water is leaking out.
1.45 kWh
The door opens by itself.
The required degree of dryness
was not achieved or the drying
time was too long.
Laundry damp.
The humidity in the room
has increased significantly.
One or more indicator lights is/are
flashing.
Mains failure.
9
Mains plug plugged in?
Programme selected? Check the socket fuse.
Energy-saving mode is activated
see the separate Energy-saving mode instructions.
Empty the condensation container
page 4.
Clean the fluff filter
page 4.
Clean the air cooler if necessary
page 6.
Has the Inicio/Stop (Start/Stop) button been pressed?
Door closed? Programme set?
Ambient temperature greater than 5 °C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter
page 4.
Empty the condensation container.
Ambient temperature higher than 35 °C
Air inlet may be blocked
keep unobstructed.
Was an unsuitable programme selected?
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure
Restart the dryer.
Thin layer of limescale on the moisture sensors. Clean the
moisture sensors
page 6.
Use the next drying programme up or use the timer
programme as a supplement
page 7.
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Air inlet blocked?
keep unobstructed.
Ensure that the air cooler is in use.
Clean the air fluff filter and air cooler if necessary
page 4/6.
Check the installation conditions
page 8.
Switch off, allow to cool, switch on again and restart the
programme.
Remove laundry from the dryer immediately
and spread out. This allows the heat to dissipate.
airing.
page 7.
10
Advertisement
