Sleep Mode; Set Timer; Adjusting The Brightness - Sharper Image 207377 User Manual

SLEEP MODE

Long press the POWER and "+" buttons simultaneously to enter Sleep Mode. In Sleep Mode, the wind
speed gradually decreases until it turns off. The symbol "SO" will appear on the display screen.
Sleep Mode

SET TIMER

While the device is operating, long press the POWER button 2 seconds to enter Timer
Mode. The screen will flash for 5 seconds while you set the timer. At the same time, a
dot in the upper right corner will illuminate. While the screen is flashing, press the "-"
or "+" buttons to set the timer from 1 hour to 12 hours. After you set the timer, the
screen will go back to showing the wind speed.
CANCEL TIMER
If you decide to cancel the timer, long press the POWER button 2 seconds to re-
enter Timer Mode. At that point, use the "-" button to reset the timer to 0 hours. After
flashing for 5 seconds, the dot will turn off and the screen will go back to showing the
wind speed.
SELECTING THE NIGHT LIGHT COLOR
The Night Light is independent from the cooling functions of this device, and can
operate whether the fan is on or off. Press the button in the top left corner to turn
on the night light. Each time you press the button, the color will change. The color
order is: White > Purple > Red > Green > Blue > Cyan > Light Blue > Multi > Off.

ADJUSTING THE BRIGHTNESS

Long press the button to adjust the light from brighter to darker. Long press the
button a second time to adjust the light from darker to brighter. Release the button
when you reach your desired brightness level.
- 5 -