Removing The 3.5-Inch Hard Drive; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the 3.5-inch hard drive

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

Remove the left-side cover.

Procedure

1. Disconnect the data and power cables from the hard drive.
2. Press the release tabs on the hard-drive carrier and slide the hard-drive carrier out of the hard-drive cage.
1. data cable
3. hard-drive cage
5. hard-drive carrier
3. Pry the hard-drive carrier to release the tabs on the carrier from the slots on the hard drive.
4. Lift the hard drive off the hard-drive carrier.
NOTE: Note the orientation of the hard drive so that you can replace it correctly.
30
computer. After working inside your computer, follow the instructions in
2. power cable
4. release tabs
After working
www.dell.com/