Controls And Displays - Bosch TASSIMO TAS 55 KR Series Instruction Manual

22
Controls­and­Displays
(see the illustration at the beginning of this
instruction manual)
ON­/­OFF­switch­(1)
The ON / OFF switch is the main power
switch for the machine. You use it to turn
on your TASSIMO machine or turn it off
completely.
i ¡
Note:
To save even more energy, the appliance
should be switched off after each use.
Start­/­Stop­button­(2)
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes.
Drink­adjustment­buttons­
+­ ­(2a)­and­–­
You use the drink adjustment buttons
to adjust the size of the drink you are
preparing.
2a­ ­ M akes­a­larger­/­longer­drink­
(milder flavour)
2b­ ­ M akes­a­smaller­/­shorter­drink­
(stronger flavour)
+ −
LED­(3a)­and­
These LEDs light up when the T DISC has
been detected. The
individually according to whether a bigger
or smaller drink has been selected and
flash during the brewing process.
Robert Bosch Hausgeräte GmbH
06_TAS55_Korea.indb 22
­(2b)
LED­(3b)
+ −
and LEDs light up
F
Status­LED­ (3c)
The Status LED indicates four machine
conditions:
– Steady orange:
Machine is in standby mode
– Blinking orange:
Machine is in the process of brewing a
drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognized)
– Dimmed, orange light:
Power save mode
­ ! Risk­of­scalding!
Wait until the Status LED
stopped blinking before attempting to
open the brewing unit.
T
Fill­water­tank­ ­(3d)
This indicator lights up when the removable
water tank needs to be refilled or is not in
place.
Q
Descale­required­ ­(3e)
This indicator lights up or blinks when your
TASSIMO machine must be descaled.
i ¡
Note:
Always descale your TASSIMO machine in
accordance with the instructions provided
under "Descaling" on page 28.
en
F
(3c) has
02.05.2012 12:20:39