Functional description Sun ref FD 157990 Version 1.0 27/01/03 1. Introduction This functional description contains : • ELECTRONIC PRODUCT FORM : information concerning the physical installation the software installation the BINDING : different connections with the others products • FUNCTIONS : contains the functional description , the functioning of each variables , each configuration properties and the interactions .
Functional description Sun ref FD 157990 Version 1.0 17 November 1998 2. ELECTRONIC PRODUCT FORM 2.1 Product description This product (Sun Sensor Interface) is an interface between one or two SOMFY sun sensor and the LonWorks network (free topology , 78 kbs). This product needs a router power supply.
Functional description Sun ref FD 157990 Version 1.0 27/01/03 2.2 Physical installation BIU-LT BIU-LT ROUTER ROUTER POWER SUPPLY SEGMENT 1 SEGMENT 1 BIU-2LT BIU-2DC REPEATER REPETOR POWER SUPPLY SEGMENT 2 SEGMENT 2 GROUP CONTROL GROUP CONTROL WIND SENSOR WIND SENSOR SUN SENSOR SUN SENSOR INTERFACE...
Functional description Sun ref FD 157990 Version 1.0 17 November 1998 2.3 Technical specifications Hager Moduline 8000 box System of protection IP 20 Supply power supply from the network Lon network free topology 78kbit/s T° range working +5°C to +45°C storing -20°C to +70°C Connectors...
Functional description Sun ref FD 157990 Version 1.0 27/01/03 2.4 wiring 1 3 5 7 Made in France Test Set-up L E D s e r v i c e P I N Push button service PIN Test mode EBBT930140 LPT-10 ¨...
Functional description Sun ref FD 157990 Version 1.0 17 November 1998 2.5 Logic representation A standard representation of this product view from the network is a functional profile . That describe the product in 1 functional object : nvoStatus SUN SENSOR OBJECT SNVT_obj_Status nvoInstallDel SNVT_lev_disc...
Functional description Sun ref FD 157990 Version 1.0 27/01/03 2.6 Binding The functional relation between Group Control Interface , Sensor interfaces ,.., is defined by the binding via the network input not used in the product . nviSwitch0 nvoSwitch BIU-LT SNVT_setting SNVT_setting nviSwitch1...
Functional description Sun ref FD 157990 Version 1.0 17 November 1998 3. FUNCTIONS 3.1 Introduction One function depending , of the Binding and of the parameters of configuration , is possible with this product The network management tools can be controlled . NOTA :each network variable is defined in the functional profile 157990 version 1.0 10/15...
Functional description Sun ref FD 157990 Version 1.0 27/01/03 3.2 Brightness measurement The interface measures continuously the brightness from one or two sensors .When they are 2 of them , it compares the two values and takes into account the highest one . It transmits the measured value on the network : -every time it crosses one of the 15 possible values of the threshold .
Functional description Sun ref FD 157990 Version 1.0 17 November 1998 • For the first one ,1 value is possible : ID=0 : node object • For the second one , 4 values are possible 0 :RQ_NORMAL :enable object and remove override. 1 :RQ_DISABLED : disable object.
Functional description Sun ref FD 157990 Version 1.0 27/01/03 How to use : nvoStatus is set only when a request status is asked . ACTION NvoStatus object_id invalid_id invalid_request disabled The node object is disable. Table 2 : How to use nvoStatus 3.5 Different configurations This product supports 3 different configuration processes on the network : -automatic installation : nothing has to be done at installation ;...
Page 14
Functional description Sun ref FD 157990 Version 1.0 17 November 1998 This function is linked with the input & output variable SNVT_lev_disc nviInstallDel SNVT_lev_disc nvoInstallDel and with the configuration variable SNVT_config_src nciConfigSource 14/15...
Functional description Sun ref FD 157990 Version 1.0 27/01/03 4. DOCUMENTATION REFERENCE • The SNVT Master List and Programmer’s Guide • The Functional Profile ref.157990 version 1.0 15/15...