Dell Latitude 3510 Service Manual page 39

Steps
1. Align and slide the solid-state drive into the slot.
2. Replace the single (M2x3) screw to secure the solid-state drive module to the system.
Next steps
1. Install the battery cable.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the SD Card.
3. Remove the base cover.
4. Disconnect the battery.
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure.
After working inside your computer.
before working inside your computer.
Disassembly and reassembly 39