Troy-Bilt 460 Series Operator's Manual page 15

Self-propelled mower
Table of Contents

Advertisement

Available languages

Available languages

Engine Care
A list of key engine maintenance jobs required for good
performance by the mower is given below. Follow the
accompanying engine manual for a detailed list and instructions.
Maintain oil level as instructed in engine manual.
Service air cleaner every 25 hours under normal conditions.
Clean every few hours under extremely dusty conditions.
Poor engine performance and flooding usually indicates
that the air cleaner should be serviced. To service the air
cleaner, refer to the engine manual.
Clean spark plug and reset the gap once a season. Spark
plug replacement is recommended at the start of each
mowing season. Check engine manual for correct plug
type and gap specifications.
Clean engine regularly with a cloth or brush. Keep the
top of the engine clean to permit proper air circulation.
Remove all grass, dirt, and combustible debris from muffler
area.
Replacing Rear Flap
1.
To remove rear flap, lift rear door, and press flap in on
either side to remove from hole. See Fig. 6-2.
Figure 6-
2.
Remove flap from opposite hole and replace with new flap
in the opposite order and manner of removal.
s
6 — M
ectiOn
& a
aintenance
djustMents
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

540 seriesV560Series 560

Table of Contents