Battery Charging; Operation - Sharper Image 207072 User Manual

BATTERY CHARGING

Place the receiver on the base for charging for 6+ hours before first use. During charging, the Battery Charging icon is ON. When it is fully
charged, the Battery Charging icon is OFF. A fully-charged battery will give you up to 5 hours of listening time. When the speaker is powered
by battery, the battery icon is ON.
When the receiver is not in use, or when the Battery icon blinks, place the receiver on the base for charging.

OPERATION

On/Off, Volume, and Tone Control
1. Rotate the knob to turn the receiver On or Off, and to adjust the volume
2. You can turn your TV speaker to Low or to Off. On some TVs, you may need to use your remote to go into the TV's Menu to achieve an
optimal audio/speaker setting. Please refer to your TV's user manual for details
3. To conserve battery power, the receiver will shift into standby mode if no audio signal is received from the base (after your TV is turned
off) for a period longer than three minutes. The volume On/Off indicator will be off during this standby time. When the audio signal is
received, the receiver will reactivate NOTE: If the receiver has hibernated too long and hasn't connected with the base, rotate the knob,
turn off the receiver, then turn the receiver back on to re-sync with the base.
4. Set the Tone Control to a position that enables you to hear and understand dialogue best
Set Clock
1. Turn the knob clockwise to turn the speaker ON
2. Press "SET"
3. Press "-" or "+" to select 12-hr or 24-hr format
4. Press "SET" again, then press "-" or "+" to select hour
5. Press "SET" again, then press "-" or "+" to select minute
6. Press "SET" again to exit
FM Radio
1. Press "FM" to switch between FM radio and TV
2. Press (or press and hold) "-" or "+" to select a different frequency
- 7 -