Download Print this page

Nautel Vector VR500 Upgrade Manual

Upgrading vector vr500 to vr1000

Advertisement

Quick Links

Upgrading Vector
VR500 to VR1000
IS06012
Issue 1.0
05 September 2006
Nautel Limited
10089 Peggy's Cove Road,
Hackett's Cove, NS, Canada B3Z 3J4
T.877 6 nautel (628835) or +1.902.823.2233
F.+1.902.823.3183 info@nautel.com
U.S. customers please contact:
Nautel Inc.
201 Target Industrial Circle, Bangor ME 04401
T.877 6 nautel (628835) or +1.207.947.8200
F.+1.207.947.3693 info@nautel.com
e-mail: support@nautel.com
www.nautel.com
© Copyright 2006 NAUTEL. All rights reserved.

Advertisement

loading

Summary of Contents for Nautel Vector VR500

  • Page 1 Hackett's Cove, NS, Canada B3Z 3J4 T.877 6 nautel (628835) or +1.902.823.2233 F.+1.902.823.3183 info@nautel.com U.S. customers please contact: Nautel Inc. 201 Target Industrial Circle, Bangor ME 04401 T.877 6 nautel (628835) or +1.207.947.8200 F.+1.207.947.3693 info@nautel.com e-mail: support@nautel.com www.nautel.com © Copyright 2006 NAUTEL. All rights reserved.
  • Page 2: Information Sheet

    - 50 Ω load for RF MONITOR checks • Disconnect the wire from A1TB1-1, noting it originates from the centre of - Cable ties (quantity 15 each of Nautel Part connector J3. # HT29, HT30 and HT31 provided) - Vector NDB Technical Instruction Manual •...
  • Page 3 J1 and J2. Add a similar warning label, using indelible ink, above connector J3. MOUNTING HARDWARE (8 places, including 2 on opposite side) Figure 1: Installing Additional RF Power Block (A4) Upgrading Vector VR500 to VR1000 Page 2 of 4 Issue 1.0 IS06012...
  • Page 4: Completing Assembly

    (b) Reinstall any blank panels that were A1 Combiner/Probe removed. A3 Original RF Power Block A4 Additional RF Power Block (c) Reinstall the transmitter’s side panels. A7 Dc Distribution Assembly A8 Ac Distribution Assembly Upgrading Vector VR500 to VR1000 Page 3 of 4 IS06012 Issue 1.0...
  • Page 5: Calibration And Testing

    BYPASS service. mode (see 3.6.4 of the Vector NDB Technical Instruction Manual). (f) Calibrate the transmitter’s output power (see 4.3.6.4 of the Vector NDB Technical Instruction Manual). Upgrading Vector VR500 to VR1000 Page 4 of 4 Issue 1.0 IS06012...

This manual is also suitable for:

Vector vr1000