Assemble The Antenna; Attach The Antenna Bracket To The Uhf Element - RCA ANT950E Installation Manual

Use the RCA Signal Finder App to find the best
1
location for your antenna. (Optional)
2

Assemble the antenna.

A. Attach the antenna bracket to the UHF element.
Antenna
bracket, front
Antenna
bracket, back
2
In the Google Play or Apple App Stores, search for "RCA Signal Finder" and
look for the icon shown here. Then download and install the App.
Launch the App and follow the directions there to find the best location and
orientation for your antenna.
Find the F-connectors on the back of one of the UHF
elements and on the front of the antenna bracket, as
shown here.
Insert the bracket's two bottom connectors into the
UHF element's connectors.
UHF element, back
Insert 6 M4x23 screws into the slots on the back of
the bracket, as shown here. Make sure the slots are
aligned with the holes on the UHF element.
Screw the M4x23 screws into place to secure the
bracket to the UHF element.
M4x23 screws
Pieces Used:
(2) UHF
elements
Antenna
bracket
(12) M4x23
screws