Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Racks & Stands
  5. MK-704
  6. Installation manual

Konica Minolta MK-704 Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
I. Accessory parts
[MK-704: Mount Kit]
No.
Name
1. Mounting
Bracket
2. Shield Plate
3. Speaker
4. DIMM (128MB)
5. Screw
(3 × 6 mm)
6. Edge Cover
7. Label
(Super
G3 label)
8. Installation
Manual
* Edge Cover is not used.
4038-7181-05
MK-704
INSTALLATION MANUAL
Shape
Q'ty
1
4037IXC103DB
1
4037IXC178DA
1
4037IXC104DA
1
4037IXC105DA
3
4037IXC153DA
1
4037IXC107DA
1
4037IXC164DA
1 set
4980IXC019DA
Mount Kit
[FK-502: FAX Kit]
No.
Name
1. FAX Kit
2. Modular Cable*
3. Label A*
4. Label B*
* Varies depending on the applicable marketing
area
Note:
To install this Kit, the MK-706 (Mount Kit) must first
be installed on the machine.
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting your head in the wrapper involves
danger of suffocation.
E-1
Applied Machine: C252 / C250
COLOR MFP 25 ppm
for Product Code 4038
Shape
Q'ty
4037IXC118DA
4442U015AA
4037IXC226DA
1
1
1
1

Advertisement

loading

Related Manuals for Konica Minolta MK-704

Summary of Contents for Konica Minolta MK-704

  • Page 1 MK-704 Mount Kit INSTALLATION MANUAL Applied Machine: C252 / C250 COLOR MFP 25 ppm for Product Code 4038 I. Accessory parts [FK-502: FAX Kit] [MK-704: Mount Kit] Name Shape Q’ty 1. FAX Kit Name Shape Q’ty 1. Mounting Bracket 4037IXC118DA 2.

  • Page 2: Installation Procedures

    II. Installation procedures 5. Remove the upper rear cover (four screws). 1. Turn off the machine. 2. Remove the cord clamp and unplug the power cord from the machine (one screw). 4038IXC037DB 6. Disconnect the IR connector on the right side of the machine.
  • Page 3 9. Open the tab of the slot (Lowest position) of the 11.Open the front door. MFP control board (PWB-MFP) and push the DIMM into the slot making sure the direction of the DIMM. Note: Push the DIMM all the way into position until the tabs on both sides of the slot fit into the cutouts in the DIMM.
  • Page 4 14.Position the speaker from the backside of the 18.Close the front door. Mounting Bracket. Note: Set it making sure the direction of A portion. 4038IXC022DA 19.Affix the label to the position shown below. 4038IXC083DB 15.Install the Mounting Bracket to the machine and connect the connector (two screws furnished with the kit).
  • Page 5 III. Installation Procedures of FAX Kit (FK- 4. Reinstall the right rear cover that has been removed in step 7 on P. E-2 (three screws). 502) 5. Plug in the IR connector that has been removed in step 6 on P. E-2 and close the right door. 1.
  • Page 6 IV. Setting the FAX 8. Reinstall the lower rear cover that has been removed in step 3 on P. E-2 (seven screws). 1. Turn on the machine. 2. Display the Service Mode screen. (For details of how to display the Service Mode screen, see the Service Manual.) 3.
  • Page 7 7. Touch “System 1.” 10.Use the key to select the Target Area. (Refer to the list below) 4037IXE295DA 4037IXE620DA 8. Touch “Marketing Area.” Country code setting for FAX U.S. Portugal EU* (PT) Canada Italy EU* (IT) Germany Poland EU* (PL) U.K.
  • Page 8 13.Touch “Initialization.” 17.Touch “END.” 18.Touch “Exit” on the Service Mode screen. 19.Turn OFF and ON the Main Power Switch. Note: When displayed the Service Mode screen, be sure to turn off the main power after exiting the Service Mode screen and wait for 10 seconds or more before turning on.

  • Page 9: Affixing The Labels

    4. Touch “NetWork Setting 2.” 4037IXE319DA 5. Touch “OFF” of Dial Tone Detection. 4037IXE320DA 6. Touch “END.” 7. Touch “Exit” on the Service Mode screen. 8. Turn OFF and ON the Main Power Switch. Note: When displayed the Service Mode screen, be sure to turn off the main power after exiting the Service Mode screen and wait for 10 seconds or more before turning on.