Advertisement
Removes EMI/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility
grid-switching and lightning related surges
Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes
Continuous transformer filtering with no wearable parts reduces surges in the worst of power environments to harmless levels
Includes 4 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch
Rugged all-metal housing ships ready for upright tower or wallmount installation
Specifications
OVERVIEW
Amp Capacity
Efficiency
Form Factor
Input Plug Type
Let-through Voltage
(Combination Wave)
Let-through Voltage (Ring
Wave)
Noise Suppression Rating
Nominal Voltage / Frequency
Output Receptacle Qty / Type
Over Current Protection
Suppression Joule Rating
Surge Test Conditions
Total Harmonic Distortion
Transformer Type
VA / Watt Capacity
INPUT
Input cord length (ft.)
Input cord length (m)
PHYSICAL
Shipping weight (lbs)
Shipping weight (kg)
Cooling method
Unit Dimensions (HWD/in)
Unit Dimensions (HWD/cm)
Shipping Dimensions
(HWD/in)
Shipping Dimensions
(HWD/cm)
Unit weight (lbs)
4.2A at 120V AC
96%
Small tower format, wall mountable
NEMA 5-15P
L-N:
L-N:
33-65dB normal mode; > 80dB common mode
120V / 60Hz
4 NEMA 5-15R
Yes, 4.5A circuit breaker
680 Joules
Per ANSI/IEEE C62.41 - (IEEE587) Cat. A & B test waveforms
less than 1%
Low impedence isolation transformer
500
6
1.83
23.6
10.71
Convection
5.5 x 6.25 x 8.5
13.97 x 15.88 x 21.59
7.25 x 13.25 x 6
18.42 x 33.66 x 15.24
22.6
Advertisement
