GE JVM2160 Owner's Manual page 9

Time and Auto Microwave Features
Learn about your microwave oven.
CAUTION
• To avoid risk of personal injury or property damage, do not operation the microwave oven empty.
• To avoid risk of personal injury or property damage, do not use stoneware, aluminum foil, metal
utensils, or mental trimmed utensils in the microwave oven.
Function description:
When the oven first plugged in, the display will show "12:00" and ":" flashing.
¾
When cooking setting is interrupted for 1 minute, the system will back to the standby mode
¾
automatically.
During cooking, if press Stop/Cancel pad once or open the door, the program will be paused,close
¾
the door, then press Start/Add 30Sec pad to resume, but if press Stop/Cancel padtwice, the
program will be canceled.
After ending cooking, "END" will display and the system will sound beeps to remind user everytwo
¾
minutes until user press Stop/Cancel pad or open the door.
SIGNALS DURING OVEN SETTINGS
¾
ONE SIGNAL: Oven accepts the entry.
¾
TWO SIGNALS: Oven does not accept the entry, please check and try again.
¾
Setting the Clock
This is a 12 or 24 hour clock. In standby mode, press Clock pad once to choose 12 hour clock and if
you want to choose 24 hour clock, press Clock pad again
Example: Suppose you want to set the clock for 8:08 am.
1. In standby mode, press Clock pad once or twice.
2. Press number pads 8, 0 and 8, the display will show"08:08".
3. Press Start/Add 30Sec to confirm
NOTE:
• During cooking, you can press Clock pad to check the clock.
• "00:00" will display and two beeps will sound to remind user to resume load the time, if you enter time is
beyond the scope of clock when you set the clock.
Setting Microwave cooking program
For microwave cooking, cooking power level and time should be set. The longest cooking time you can set is 99
minutes and 99 seconds. Press Power Level pad once and then press number pads to choose cooking power
level.
29-6290
BASIC CONTROLS
9