Panasonic Live Production Suite Series Operating Manual page 24

Crosspoint area
r AV-HS60C2
2
3
1
Black
4
1
Black
r AV-HS60C4
1 KEY bus selector buttons (KEY BUS DELEGATION)
Switches functions that can be operated using the KEY bus crosspoint buttons.
<AUX 1/2> to <AUX 15/16>
buttons
<KEY1 F/S> to <KEY4 F/S>
buttons
<VMEM F/S> button
<MCRO> button
<DSK1 F/S> to <DSK4 F/S>
buttons
2 KEY bus crosspoint buttons (AV-HS60C2: 1 to 24, AV-HS60C4: 1 to 16)
Selects the source of the bus which was selected by the KEY bus selector buttons.
Source can be selected using the <2nd PAGE>/<3rd PAGE> button. (AV-HS60C2: Maximum of 96, AV-HS60C4: Maximum of 64) (page 25)
Chapter 3 Part Names and Functions — Control Panel AV-HS60C2/AV-HS60C4
2 3 4 5 6 7 8 9 10
SDI SDI SDI SDI SDI SDI SDI SDI SDI
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9
2 3 4 5 6 7 8 9 10
SDI SDI SDI SDI SDI SDI SDI SDI SDI
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9
2
3
1 2 3 4 5
Black SDI SDI SDI SDI
IN1 IN2 IN3 IN4
4
1 2 3 4 5
Black SDI SDI SDI SDI
IN1 IN2 IN3 IN4
Switches to the source selector buttons for the AUX buses.
f If you press the same buttons again while the <AUX 1/2> to <AUX 15/16> buttons are selected, the bus in the
background is selected.
Example)
If you press the <AUX 1/2> button again while the AUX1 bus is selected, the AUX2 bus is selected.
f The <AUX 1/2> to <AUX 3/4> buttons have the MIX transition function. (page 119)
f The <AUX 1/2> to <AUX 15/16> buttons have the crosspoint link coupling function. (page 117)
Switches to the source selector buttons for the key fill buses or key source buses.
f If you select key fill signal or key source signal using the KEY bus crosspoint buttons, the signals are linked and
another signal is automatically selected. The unit's linking operation has two modes. The mode setting can be made
from the <OPR> button on the top menu → [SOURCE LINK] → [Key Assign] tab → [Master/Slave]. The KEY3/KEY4
functions become the PinP1/PinP2 functions in the Live Production Suite.
Switches to the source selector buttons for the fill buses or source buses of [CLIP1], [CLIP2] (video memory) and
[STILL1], [STILL2] (still image memory) input buses.
Switches to the start button to play back the macro memory assigned to the KEY bus crosspoint buttons. The
assignment can be made from the <MEM> button on the top menu → [MACRO] → [XPT Panel1] - [XPT Panel3] tab.
(page 160)
Switches to the source selector buttons for the DSK fill buses or DSK source buses.
f If you select key fill signal or key source signal using the KEY bus crosspoint buttons, the signals are linked and
another signal is automatically selected. The unit's linking operation has two modes. The mode setting can be made
from the <OPR> button on the top menu → [SOURCE LINK] → [Key Assign] tab → [Master/Slave]. The <DSK3 F/S>
and <DSK4 F/S> buttons cannot be used with the Live Production Suite.
1
11 12 13 14 15 16 17 18
SDI SDI SDI Still Still Still Still Clip
IN10 IN11 IN12 1V 2V 3V 4V 1V
11 12 13 14 15 16 17 18
SDI SDI SDI Still Still Still Still Clip
IN10 IN11 IN12 1V 2V 3V 4V 1V
1
6 7 8 9 10 11 12 13 14
SDI SDI SDI SDI SDI SDI SDI SDI Still
IN5 IN6 IN7 IN8 IN9 IN10 IN11 IN12 1V
6 7 8 9 10 11 12 13 14
SDI SDI SDI SDI SDI SDI SDI SDI Still
IN5 IN6 IN7 IN8 IN9 IN10 IN11 IN12 1V
– 24 –
BUS
SHFT
19 20 21 22 23 24
Clip Clip Clip CBGD ME1 ME2
2V 3V 4V 1 PGM PGM
BUS
SHFT
19 20 21 22 23 24
Clip Clip Clip CBGD ME1 ME2
2V 3V 4V 1 PGM PGM
5
BUS
SHFT
6
15 16
Still Still
2V 3V
7
1
BUS
SHFT
15 16
Still Still
2V 3V
8
5
6
7
1
8