Language Setup - LENCO MC-150 User Manual

If it is in AUX mode more than 4 hours, it will automatically switch to standby mode. When it is 10 minutes before entering the
standby, the display will flash. You can press PLAY button to disable the auto-off function.
EQ OPERATION
You can enjoy different EQ sound effect modes. Press the EQUALIZER button will change to different sound effects of
FLAT/CLASSIC/ROCK/POP/JAZZ.
X-BASS
You can also boost the bass effect of the music. Press the X-BASS button will toggle the X-Bass effect between ON and OFF.
SLEEP FUNCTION
1. When the unit is switched on, press the SLEEP button repeatedly to select a sleep duration from either SLEEP 00 (sleep off), 90,
80, 70, 60, 50, 40, 30, 20 or 10 minutes. The sleep icon
2. When the sleep timer is zero, the unit will turn off automatically.
3. To cancel the sleep function, press the STANDBY button to turn off the unit. Or press the SLEEP button repeatedly to select
"SLEEP 00".
ENERGY SAVING
Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once no music
has been playing for about 15 minutes except in AUX mode. If it is in AUX mode more than 4 hours, it will automatically switch to
standby mode. When it is 10 minutes before entering the standby, the display will flash. You can press PLAY button to disable the
auto-off function.
To reactivate the unit, press the STANDBY button to turn on the unit.
SOFTWARE VERSION CHECK
You can check the unit software version.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS
4. Press the PREVIOUS
version number.
5. Press the remote control MENU button to exit the menu control.

LANGUAGE SETUP

You can set the unit's language.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS
4. Press the PREVIOUS
5. Press the PREVIOUS
the ENTER button to confirm.
6. Press the remote control MENU button to exit the menu control.
FACTORY RESET
This function resets the unit to the original factory settings.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS
4. Press the PREVIOUS
5. Press the PREVIOUS
ACCESSORIES

Wire antenna x 1

Remote control x 1

Instruction manual x 1
or NEXT button until "SYSTEM" is displayed and then press the ENTER button.
or NEXT button until "SW VER" is displayed and then press the ENTER button to show the software
or NEXT button until "SYSTEM" is displayed and then press the ENTER button.
or NEXT button until "LANGUAGE" is displayed and then press the ENTER button.
or NEXT button to toggle between different languages. Select your desired language and then press
or NEXT button until "SYSTEM" is displayed and then press the ENTER button.
or NEXT button until "RESET" is displayed and then press the ENTER button.
or NEXT button until "RESET Y" is displayed and then press the ENTER button to reset the unit.
will be shown on the display.
12