Setting up Avaya IX Huddle Camera HC050
4. If you are using Avaya IX
as the default camera in one of the following two ways:
• Using the directly attached interface (monitor and keyboard), select: Configure >
Advanced > I/O connections > Cameras > General > Default Camera > USB
• Through the web using the IP address, select: Administrator Settings > I/O
Connections > Cameras > General > Default camera > USB
The video signal source for the XT unit is changed to the USB port.
5. To configure the audio source, see Avaya IX Video Conferencing XT Series Deployment
Guide.
Related links
Setting up Avaya IX Huddle Camera HC050
Setting up Avaya IX
camera for your Workplace Client or Spaces client
About this task
You can use the Avaya IX
Workplace Client or Avaya IX
Note:
Under this configuration, you can control Avaya IX
provided remote control.
May 2020
™
Huddle Camera HC050 as the first camera, you must enable it
on page 10
™
Huddle Camera HC050 as a USB
™
Huddle Camera HC050 as a USB camera for your Avaya IX
™
Spaces client. The audio source is the embedded microphones.
™
Using Avaya IX
Comments on this document? infodev@avaya.com
™
Huddle Camera HC050 using the
Huddle Camera HC050
™
12