Advertisement
Quick Links
Installation Instructions
Specifications
Dimensions (Front View)
Base Cabinet Installation
• The cabinet depth from the outer edge of the face
frame to the inside back of the cabinet or wall
should be at least 24" (see Fig. 04).
https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in...
Fig. 02
Dimensions (Side View)
Fig. 03
Cut Out Dimensions
Updated: Sun, 14 Jun 2020 18:16:52 GMT
Powered by
1
Advertisement
Related Manuals for Fisher & Paykel OD30WDX2
Summary of Contents for Fisher & Paykel OD30WDX2
- Page 1 Cut Out Dimensions • The cabinet depth from the outer edge of the face frame to the inside back of the cabinet or wall should be at least 24” (see Fig. 04). https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT Powered by...
-
Page 2: Wall Cabinet Installation
• Power supply required: 120Volts AC; 5 Amp min., 15 Amp maximum circuit requirement. Fig. 04 Wall Cabinet Installation SINGLE Wall Oven and Microwave and Warming DOUBLE Wall Oven and Warming Drawer Installation Drawer Installation Fig. 05 https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT Powered by... -
Page 3: Step 1 Removing The Drawer
(Fig. 09) while pulling the drawer open at the same time (Fig. 10). 4. Keep pulling the drawer open until the slides are separated. Removing the drawer for the very first time does require extra force. https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT Powered by... -
Page 4: Step 2 Mounting Installation Of Chassis
20” to be able to secure the Warming Drawer. 1. Use the screws provided and attach the mounting clips. They must be installed for anti-tip safety to the bottom https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT... - Page 5 2. Plug power cord into AC outlet. Slide the body onto the anti-tip mounting clips (see Fig.12). 3. Use the two supplied 1-1/2” long screws through the two embossed holes (see Fig.13) to secure the front of the Warming Drawer. Fig.11 Fig.12 Fig.13 https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT Powered by...
-
Page 6: Step 3 Replacing The Drawer
When the drawer is re-installed, the slides may feel stiff and hard to push in. This is normal. Pull the drawer back out to realign the rollers. The drawer should now feel smooth and free. Fig. 15 Fig. 14 https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT Powered by... -
Page 7: Adjusting The Latch
The latch can be repositioned vertically by adjusting the two torx screws. The force necessary to open and close the drawer can be changed by adjusting the two flathead screws (Fig. 16). Fig. 16 https://producthelp.fisherpaykel.com/us/Cook/Built-In_Ovens/Single/OD30WDX2/User_Guide_OD30WDX2/03_installation_in… Updated: Sun, 14 Jun 2020 18:16:52 GMT Powered by...