ZyXEL Communications LTE Series User Manual page 107

Table 32 Network Setting > Wireless > More AP Edit (continued)
LABEL
WiFi Network Name
Hide SSID
Guest WLAN
Access Scenario
Max. Upstream Bandwidth
Max. downstream
Bandwidth
BSSID
BBSID Subnet
DHCP Start Address
DHCP End Address
SSID Subnet Mask
LAN IP Address
Security Level
Security Mode
Generate password
automatically
Chapter 7 Wireless
DESCRIPTION
The SSID (Service Set IDentity) identifies the service set with which a
WiFi
associated. devices associating to the access point (AP) must have the same
SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
This check box is grayed out if the WPS function is enabled in the Network > Wireless
> WPS screen.
Select the check box to enable Guest WLAN.
If you select Home Guest, clients connecting to the same SSID can communicate
with each other directly.
If you select External Guest, clients are blocked from connecting to each other
directly.
Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in
kilobits per second (Kbps).
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN
in kilobits per second (Kbps).
This shows the MAC address of the wireless interface on the Zyxel Device when
wireless LAN is enabled.
Select Enable to create an independent subnet for the SSID, which is separated
from the LAN subnet(s).
Enter the first of the contiguous addresses in the IP address pool for the SSID subnet.
The Zyxel Device assigns IP addresses from this DHCP pool to wireless clients
connecting to the SSID.
Enter the last of the contiguous addresses in the IP address pool for the SSID subnet.
Enter the subnet mask of the Zyxel Device for the SSID subnet.
Enter the IP address of the Zyxel Device for the Guest SSID.
Select More Secure or WPA2-PSK to add security on this
clients which want to associate to this network must have the same
settings as the Zyxel Device. When you select to use a security, additional options
appears in this screen.
Or you can select No Security to allow any client to associate with this network
without any data encryption or authentication.
See the following sections for more details about this field.
Select this option to have the Zyxel Device automatically generate a password. The
password field will not be configurable when you select this option.
LTE Series User's Guide
107
WiFi
device is
WiFi WiFi
network. The
WiFi
security