If your DEC 2000 AXP system has a factory-installed disk drive,
Step 4: Set
SCSI IDs on
it is set to SCSI ID 0.
Drives
Check the SCSI ID settings you noted earlier. If one of the
drives you are upgrading is set to SCSI ID 0, then change that
setting. SCSI settings can be found in the DECpc AXP 150 and
DEC 2000 Model 300 AXP Customer Technical Information.
Step 5:
Follow the instructions found in the DECpc AXP 150 and DEC
2000 Model 300 AXP Customer Technical Information and DECpc
Complete the
Upgrade
AXP 150 and DEC 2000 Model 300 AXP User Information to
complete the upgrade.
Step 6:
Return your DECsystem and any devices that are not
upgradeable to Digital.
Return Your
DECsystem to
1. Pack the DECsystem and devices securely in packing
Digital
2. Attach the return-address label that was in your upgrade kit.
Update the customer service contract to the DEC 2000 Model
Step 7: Update
Service
300 AXP system.
Contract
material.
Upgrade Procedure
Upgrading a DECsystem 3100
4–3