Drives
SATA Operation
SMART Reporting
Drives
System Configuration
Integrated NICs
USB Controller
Serial Port #1
Spread Spectrum Clocking
Miscellaneous Devices
Video
Primary Video
Performance
Multi Core Support
•
Disabled
•
Enabled (default)
Configures the operating mode of the integrated hard-drive controller.
•
RAID Autodetect / AHCI
•
RAID Autodetect / ATA
•
RAID On (default)
Controls if hard drive errors for integrated drives are reported during start up.
Enable Smart Reporting — Disabled by default
These fields let you enable or disable various drives in the computer:
•
SATA-0
•
SATA-1
•
SATA-2
•
SATA-3
•
SATA-4
•
SATA-5
Enables or disables the integrated network card. You can set the integrated NIC to:
•
Disable
•
Enable (default)
•
Enabled with PXE
Enables or disables the integrated USB controller.
•
Disable
•
Enable (Default)
•
No Boot
Determines how the built-in serial port operates.
•
Disable
•
Auto (default)
•
COM1
•
COM3
Enables or disables spread spectrum clocking.
•
Disable
•
Enable (default)
Enables or disables various system devices.
•
Front USB
•
Rear USB
•
Audio
Allows the user to specify the order in which the system assigns primary video controller when two or
more controllers are available.
•
Option 1
•
Option 2
Specifies whether the computer will have one or all cores enabled.
System Setup
59