Osd Display; Power On Adjustment; Temperature Control; Power Button - Samsung BE43R User Manual

OSD Display

Displays or hides a menu item on the screen.
Source OSD
Select whether to display the source OSD when the input source changes.
• Off / On
No Signal OSD
Select whether to display the no-signal OSD when no signal is detected.
• Off / On
MDC OSD
Select whether to display the MDC OSD when the product is controlled by the MDC.
• Off / On

Power On Adjustment

You can set the warm-up time for the screen to turn on after the power button is pressed. (Range:
0 – 50 seconds)
― A warm-up time that is too short may damage the product due to overvoltage.

Temperature Control

This function detects the internal temperature of the product. You can specify the temperature
range that is acceptable.
The default temperature is set to 77 °C.
The recommended operating temperature for this product is 75 to 80 °C (based on an ambient
temperature of 40 °C).
― The screen will become darker if the current temperature exceeds the specified temperature
limit. If the temperature continues to rise, the product will power off to prevent overheating.

Power Button

Set the function of the Power button. You can set the button to only turn on the product, or to
toggle between on and off states.
• Power On Only / Power On/Off
108