To Clean The Indoor Unit And User Interface; To Clean The Front Panel - Daikin Siesta ATXM20N2V1B User Reference Manual

7 | Maintenance and service

7.2 To clean the indoor unit and user interface

7.3 To clean the front panel

User reference guide
38
WARNING
To prevent electrical shocks or fire:
▪
Do NOT rinse the unit.
▪
Do NOT operate the unit with wet hands.
▪
Do NOT place any objects containing water on the unit.
CAUTION
After a long use, check the unit stand and fitting for damage. If damaged, the unit
may fall and result in injury.
CAUTION
Do NOT touch the heat exchanger fins. These fins are sharp and could result in
cutting injuries.
WARNING
Be careful with ladders when working in high places.
NOTICE
▪
Do NOT use gasoline, benzene, thinner polishing powder or liquid insecticide.
Possible consequence: Discoloration and deformation.
▪
Do NOT use water or air of 40°C or higher. Possible consequence: Discoloration
and deformation.
▪
Do NOT use polishing compounds.
▪
Do NOT use a scrubbing brush. Possible consequence: The surface finishing peels
off.
DANGER: RISK OF ELECTROCUTION
Before cleaning, be sure to stop the operation, turn the breaker off or pull out the
supply cord. Otherwise, an electric shock and injury may result.
1 Clean with a soft cloth. If it is difficult to remove stains, use water or a neutral
detergent.
1 Clean the front panel with a soft cloth. If it is difficult to remove stains, use
water or a neutral detergent.
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05