Advertisement
Power Supply
3
The EAP can be powered via a power adapter or a PSE device (such as a PoE switch) .
Option1: Via PoE Switch
PoE Switch
Connect an Ethernet cable from the PoE switch to the Ethernet port (ETH1 for EAP245/EAP265 HD)
Option2: Via Power Adapter
PoE Adapter
1
PoE
LAN
(Up to 100m)
1. Connect the Ethernet cable from the Ethernet port (ETH1 for EAP245/EAP265 HD) of the EAP
device to the provided power adapter's PoE port.
2. Connect an Ethernet cable from your LAN to the power adapter's LAN port.
3. Connect the power cord to the adapter's power socket. Connect the other end of the power cord
to a standard electrical wall outlet.
Software Configuration
4
A DHCP server (typically a router with DHCP function enabled) is required to assign IP addresses to
the EAPs and clients in your local network.
The EAP supports two configuring options:
To configure and manage EAPs singly (usually suitable for a small network with a few
EAPs), Standalone Mode is recommended. Please refer to Option 1.
To configure and manage EAPs in batch, Controller Mode is recommended. Please refer to
Option 2.
Option1: Standalone Mode
Internet
EAP
Router
EAP
Via Omada App
1. Download the TP-Link Omada App on your mobile device. It can be downloaded from Apple Store
or Google Play:
or
Scan for Omada App
Download Omada App
2. Connect your mobile device to the EAP by using the default SSID (format:
TP-Link_2.4GHz/5GHz_XXXXXX) printed on the label at the bottom of the product.
3. Open the Omada App, and wait for the EAP to appear on the Standalone APs page. Tap on the
EAP you want to configure.
The Omada App is designed to help you quickly configure the common settings. If you want to
configure advanced settings, log in to the web page of your EAP or the controller.
Via a Web Browser
1. Connect wirelessly by using the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed
on the label at the bottom of the product.
2. Launch a web browser and enter http://tplinkeap.net in the address bar. Use admin for both
Username and Password to log in.
3. Set up a new Username and Password for secure management purpose. Modify the wireless
parameters and reconnect your wireless devices to the new wireless network.
To configure other EAPs, connect your device to the EAP by the coresponding default SSID and
repeat the steps listed above. You can configure some basic functions in Standalone Mode. If you
want to configure advanced functions, use Controller Mode.
Option2: Controller Mode
Controller Mode is applicable to configuration for mass EAPs. All EAPs can be centrally configured and
monitored via Omada Software Controller, Omada Hardware Controller (OC200/OC300) or Omada
Cloud-Based Controller.
3
2
Omada Hardware Controller
Via Omada Software Controller
1. On the PC with Windows OS or Linux OS, download the Omada Software Controller installation
file from https://www.tp-link.com/support/download/omada-software-controller/.
2. Run the file and follow the wizard to install the Omada Software Controller.
3. Launch the Omada Software Controller and follow the step-by-step instructions to complete
the Quick Setup.
4. After the wizard is finished, a login screen will appear. Enter the username and password you
created and click Log in. Then you can further configure the controller.
Omada Cloud Service
After installing Omada Software Controller, you can remotely access and configure the controller
through Omada Cloud Service. Follow the steps below.
1. Enable Cloud Access on the setting page on the controller and bind a TP-Link ID to your controller.
If you have configured this in the setup wizard, skip the step.
2. Launch a web browser and
3. Enter your TP-Link ID and password to log in. A list of controllers that have been bound with your
TP-Link ID will appear. Then you can click Launch to further configure the controller.
Clients
Omada App
With Omada App, you can also manage your Omada Software Controller at a local site and remote site.
Note that Omada Software Controller needs to be kept running when using Omada App.
1. Download the TP-Link Omada App on your mobile device. It can be downloaded from Apple Store or
Google Play:
2. Launch your Omada App and configure the controller at local a site or remote site.
Local Management
a. Connect your mobile device to the EAP by using the default SSID (format:
TP-Link_2.4GHz/5GHz_XXXXXX) printed on the label at the bottom of the product.
b. Launch Omada App and go to Local Access, tap the + button on the upper-right corner to add
the controller. Then you can further configure the controller.
Remote Management
a. Make sure Cloud Access is enabled on your controller and your controller has been bound with
your TP-Link ID.
b. Launch Omada App and log in with your TP-Link ID. Then go to Cloud Access. A list of
controllers that have been bound with your TP-Link ID will appear. Then you can further
configure the controller.
Via Omada Hardware Controller (OC200/OC300)
Omada Hardware Controller (OC200/OC300), which is pre-installed with Omada Software Controller, is a
good alternative if you have no spare PC to keep running Omada Software Controller in the network. It
needs to be purchased additionally. For more details, refer to the Installation Guide of OC200/OC300.
Router
Switch
Or
Controller
Omada Software Controller
EAP
EAP
running on the Host PC
(OC200/OC300)
Clients
enter
https://omada.tplinkcloud.com in the address bar.
or
Scan for Omada App
Download Omada App
EAP
EAP
Via Omada Cloud-Based Controller
1. Launch a web browser and
enter
https://omada.tplinkcloud.com in the address bar. Then enter
your TP-Link ID and password to log in.
2. Click Add Controller and subscribe to Omada Cloud-Based Controller. Follow the instructions to
choose a plan and complete the payment. Then wait until your controller is deployed.
3. The controller will appear in the list once bound with your TP-Link ID. Click Launch and follow the
step-by-step instructions to complete the Quick Setup. After the wizard is finished, log in via the
created username and password.
4. Click Devices on the side bar and then click Add Devices. Then you can add devices to the
controller manually through the serial numbers at the bottom of the product.
Omada App
With Omada App, you can also manage your Omada Cloud-Based Controller.
1. Download the TP-Link Omada App on your mobile device. It can be downloaded from Apple Store
or Google Play:
or
Scan for Omada App
2. Launch Omada App and log in with your TP-Link ID. Then go to Cloud Access. A list of controllers
that have been bound with your TP-Link ID will appear. Then you can further configure the controller.
For detailed configurations, please visit https://www.tp-link.com/support/download/ to download the User
Guides of EAP and controller in the download center.
To ask questions, find answers, and communicate with TP-Link users or engineers,
please visit https://community.tp-link.com to join TP-Link Community.
For technical support, the user guide and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides,
welcome to email techwriter@tp-link.com.cn.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you
need service, please contact us.
Do not use the device where wireless devices are not allowed.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
The products of TP-Link partly contain software code developed by third parties, including software code
subject to the GNU General Public License ("GPL"). As applicable, the terms of the GPL and any information on
obtaining access to the respective GPL Code used in TP-Link products are available to you in
GPL-Code-Centre under (https://www.tp-link.com/en/support/gpl/). The respective programs are distributed
WITHOUT ANY WARRANTY and are subject to the copyrights of one or more authors. For details, see the GPL
Code and other terms of the GPL.
Omada Cloud-Based Controller
Router
Switch
EAP
EAP
Clients
Download Omada App
©2020 TP-Link 7106508742 REV3.3.0
Advertisement
