EasyRest PLATINUM 2.0 Quick Start Manual

PLATINUM MODEL 2.0
REMOTE CONTROL - WIRELESS
Press and hold to raise the head
Press and hold this button to illuminate
the light on the back of the remote.
Press and hold to lower the head
Press to bring bed to FLAT position
Pressing any button on the remote
will cancel this operation.
Press and release to toggle the
under bed light
Setting Memory Positions
Press and hold Memory 1, 2, 3 or 4 for more
than 3 seconds to store current position.
Press to recall memory of position #1
Press to recall memory of position #3
Press to increase massage intensity
Press to decrease massage intensity
Head massage ON/OFF button
Flashlight
on the head
on the head
Press and hold to raise the foot
Press and hold to lower the foot
Press and release to access the
"B" side of the bed
This button will function the "B" side
of the bed until no buttons are
pressed for 10 seconds. Then it
switches back to the "A" side of the bed.
Press Memory 1 & Memory 2 at same
time to operate bases together.
Press to recall memory of position #2
Press to recall memory of position #4
Press to increase massage intensity
on the foot
Press and release to toggle
Massage Modes:
• Hard Wave • Soft Pulse
• Soft Wave • Continuous
• Hard Pulse
Press to decrease massage intensity
on the foot
Foot massage ON/OFF button
No: 0717266-B
©CWA 4/2019 GEN-550