Sony BKNW-26 Installation Manual page 6

1-3. Installation Procedures
Attaching the BKNW-26 (DP-265B board)
1. Connect the DP-265B board to the CN-1541 board.
n
When having removed the DP shield case in step 7 of
the removal, be sure to attach it to the DP-265B board
before connecting the board.
2. Affix the tape that has been removed in step 6 of the
removal.
3. Reconnect the removed harnesses.
When having removed three harnesses
Reconnect the harnesses to CN1, CN5 and CN6 on the
DP-265B board respectively, and then clamp the
harness for CN1 by the lead pin.
CN5
DP-265B board
1-4 (E)
Lead pin
CN1
CN6
Tape
When having removed five harnesses
Reconnect the harnesses to CN5, CN6, CN10, CN11
and CN12 on the DP-265B board respectively, and
then clamp the harnesses for CN10 and CN12 by the
lead pin.
CN5
CN12
CN11
CN10
DP-265B board
Lead pin
CN6
Tape
BKNW-26