DeWalt DWE1622 Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Power Tool
  5. DWE1622
  6. Instruction manual

DeWalt DWE1622 Instruction Manual

Two speed magnetic drill press
Hide thumbs Also See for DWE1622:
Table of Contents

Advertisement

Quick Links

Instruction Manual
Guide D'utilisation
Manual de instrucciones
DWE1622
Two Speed Magnetic Drill Press
Perceuse magnétique à colonne à deux vitesses
Taladro de columna magnético de dos velocidades
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
WALT
e
final page size: 8.5 x 5.5 in

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DWE1622

Summary of Contents for DeWalt DWE1622

  • Page 1 Instruction Manual Guide D’utilisation Manual de instrucciones DWE1622 Two Speed Magnetic Drill Press Perceuse magnétique à colonne à deux vitesses Taladro de columna magnético de dos velocidades If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter.
  • Page 2 English English (original instructions) Français (traduction de la notice d’instructions originale) Español (traducido de las instrucciones originales)
  • Page 3 English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 4: General Power Tool Safety Warnings

    English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries.

  • Page 5: Additional Safety Information

    English into account the working conditions and the CAUTION: After switching power to the magnet off, work to be performed. Use of the power tool for the magnetic base will continue to adhere to the operations different from those intended could result surface for a moment before releasing.

  • Page 6: Assembly And Adjustments

    English WARNING: Use of this tool can generate and/ DO nOT use under wet conditions or in presence of or disperse dust, which may cause serious and flammable liquids or gases. permanent respiratory or other injury. Always use This drill press is a professional power tool. DO nOT let NIOSH/OSHA approved respiratory protection children come into contact with the tool.
  • Page 7 English Fig. C 1. Place coolant bottle  10  into the magnetic bracket  5  then slide the magnetic bracket onto the either side of the steel strip   22  2. Attach the coolant tube  11  to the coolant bottle: a. Remove the nut  23 ...

  • Page 8: Prior To Operation

    English 3. Insert the cutter  25  with pilot pin  26  and turn until Fig. H the flat meets the locking pin. When the flat meets the locking pin the collar will snap down. 4. Check that the cutter is securely held in the arbor. 5.

  • Page 9: Overload Protection

    English Try a few simple projects using scrap material until you 1. Always apply an appropriate cutting fluid, coolant or develop a “feel” for the machine. lubricant on the cutting area. 2. Make sure the drill point or cutter pilot is properly Switching On and Off (Fig.
  • Page 10 Fig. K notification is required under the Federal Consumer Safety Act. Register online at www.dewalt.com/register. Three Year Limited Warranty WALT will repair, without charge, any defects due to After repeated use, the cradle may become loose. If...

Table of Contents