Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18h
Advertisement
Related Manuals for Viking 63299
Summary of Contents for Viking 63299
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Risk of Eye Injury. Wear ANSI-approved splash-resistant safety goggles. Amperes Read the manual before Cold Cranking Amps set-up and/or use. Reserve Capacity WARNING marking concerning Risk of Fire. Ampere-hours Follow connection procedure. Page 2 For technical questions, please call 1-888-866-5797. Item 63299... - Page 3 A lead-acid battery can produce a short- plug – replace the cord or plug immediately. circuit current high enough to weld a ring or the like to metal, causing a severe burn. Item 63299 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 – in 15(e), 15(f), and 16(b) through 16(d). then connect NEGATIVE (BLACK) charger clip to free end of cable. e. Do not face battery when making final connection. Page 4 For technical questions, please call 1-888-866-5797. Item 63299...
- Page 5 Improper connection accordance with all local codes and ordinances. can result in a risk of an electric shock. Item 63299 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Specifications
• Overcharging protection – i f the battery cannot be fully charged within 24 hours, recondition Button: Use to activate the Charger will stop charging automatically. battery reconditioning function for weak, sulfated, or deeply discharged batteries. Page 6 For technical questions, please call 1-888-866-5797. Item 63299... - Page 7 4. Do not operate Charger in a closed-in battery being charged; gases from battery area or restrict ventilation in any way. will corrode and damage Charger. 5. Do not set a battery on top of Charger. Item 63299 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 POSITIVE (POS, P, +) post of battery. 4. Position yourself and free end of cable as far away from battery as possible – t hen connect NEGATIVE (BLACK) Charger clamp to free end of cable. Page 8 For technical questions, please call 1-888-866-5797. Item 63299...
-
Page 9: Operation
AUTO battery type settings within 30 seconds, Charger will start charging the battery using the default STANDARD setting – a utomatic charging rate for standard battery. BATTERY Figure F Item 63299 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Maintenance
• damaged electrical wiring or cable insulation DO nOt OpEn cHarGEr HOUSinG, • any other condition that may nO USEr-SErVicEaBLE partS inSiDE. affect its safe operation. Page 10 For technical questions, please call 1-888-866-5797. Item 63299... - Page 11 Disconnect power supply before service. record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Internal parts are not user-serviceable and are not available. Item 63299 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.