Product Features; Maintenance - HoMedics MyBaby Comfort Creatures Elephant Instruction Manual

CREATE THE PERFECT ENVIRONMENT FOR YOUR BABY
Thank you for purchasing the MyBaby by HoMedics Comfort Creatures Elephant nightlight. The nightlight will help
provide a decorative appeal that can grow with your child.

PRODUCT FEATURES:

• 5 Comforting LED Colour Options.
• Gently squeeze the trunk to move through light sequence
• 15, 30 or 60 Minute Auto-Off Timer
INSTRUCTIONS FOR USE:
1. This unit is powered by two "AA" batteries, which are included. You
can also purchase an AC adaptor on our website at https://www.
homedics.co.uk/.
2. To install batteries, use a flat head screwdriver to detach the battery
door screw. Insert two "AA" batteries into the compartment on the
bottom according to the polarity indicated. Replace the battery
compartment door and tighten the screw to secure.
Note: We recommend using Alkaline batteries for longer battery life.
It is time to change the batteries when the light becomes faint or
stops.
Colour-changing Light:
1. Press the button on the trunk of the elephant to turn on.
2. Press again to manually move through 5 LED options.
3. Press and hold button (3 seconds) and nightlight will slowly cycle
through colours automatically.
4. Press button again to stop on preferred colour.
5. Press again to turn off.
Using the Auto-Timer:
1. Press the TIMER button to toggle through the different timer
settings – 15, 30, or 60 minutes.
2. The corresponding LED will illuminate your selection.
3. The unit will automatically shut off after the selected time is
reached.
4. If you choose to keep the light on continuously again, toggle
through the TIMER button until the green LED light is not
illuminated on any of the time choices.
Note: Do not select the TIMER if you wish to keep the light on
continuously.

MAINTENANCE:

To Store
You may leave the unit on display, store it in its box or a cool, dry place.
Batteries should be removed prior to storage.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner
to clean. Do not immerse in water.
POWER BUTTON
TIMER BUTTON
GB
2 I