Dell Inspiron 7300 2n1 Black Service Manual page 59

Performance
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
Table 13. System setup options—Power Management menu
Power Management
Wake on AC
Wake on Dell USB-C Dock
Auto On Time
Block Sleep
Battery Charge Configuration
Enable Advanced Battery Charge
Configuration
Peak Shift
Wireless Radio Control
Control WLAN radio
Wake on LAN
Intel Speed Shift Technology
Lid Switch
Power On Lid Open
Default: ON
Enabled or disabled the Intel Hyper-Threading mode of the processor. If enabled, the
Intel Hyper-Threading increases the efficiency of the processor resources when
multiple threads run on each core.
Default: ON
Enables the computer to turn on and go to boot when AC power is supplied to the
computer.
Default: OFF
Enables connecting a Dell USB-C Dock to wake the computer from Standby.
Default: ON
Enables the computer to automatically power on for defined days and times.
Default: Disabled. The system will not automatically power up.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables the computer to run on battery during power usage hours. Use the below
options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your typical
battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the day to a
specified work period. Advanced Battery Charged maximizes battery health while still
supporting heavy use during the work day.
Default: OFF
Enables the computer to run on battery during peak power usage hours.
Default: OFF
Enables to sense the connection of the computer to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon
disconnection from the wired network, the selected wireless radios are re-enabled.
Default: OFF
Enables or disables the computer to turn on by a special LAN signal.
Default: Disabled
Enables or disables the Intel Speed Shift Technology support. Setting this option to
enable allows the operating system to select the appropriate processor performance
automatically.
Default: ON
Enables the computer to power up from the off state whenever the lid is opened.
System setup 59