Tricity Bendix TBD903 Operating And Installation Instructions page 17

To Set The Timer To Switch Off Only
B)
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking
cooking hours button (
turn the increase control ( + ) until the required
length of cooking time is displayed, e.g. 2 hrs 15
mins as Fig. 10. Turn the decrease control (-) if
necessary.
iv) Release the buttons. The AUTO display will glow
and the time of day will be displayed after 5
seconds.
v) Set the oven temperature.
vi) To check the stop time during
period, simply press the stop time button
( ) and the stop time will be displayed, as Fig.
11.
4. To Return The Cooker To Manual After An
Automatic Programme
To return the cooker to manual operation after an
automatic programme, follow the steps given below.
At the end of a timed cooking period, the AUTO light
will flash and a bleeper will sound for up to 2
minutes. This can be stopped by pressing any of the
buttons as Fig. 12.
Turn oven control to the OFF position. The AUTO
display will continue to flash.
Press ( ) button. The AUTO display will go out as
Fig.13.
time, press the
) while holding it down,
the cooking
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
17