Operation; Replacing Batteries - Honeywell 5301DOJ Quick Start Manual

OPERATION

TO OPEN THE SAFE
1. To unlock and open safe, enter the User Code followed by
"A" or "B".
2. Turn knob clockwise and open door.
TO CLOSE THE SAFE
1. Close the door and hold it in the closed position.
2. Turn knob counterclockwise to engage the bolts and lock safe.
SECURE LOCKOUT PERIODS
If a wrong code is entered three times in a row: The digital keypad will begin a 20
second secure lockout period after the third incorrect entry. If 3 additional incorrect
entries are made, the digital keypad will begin a 5 minute secure lockout period.
During the secure lockout period the keypad will become disabled. Once the lockout
period has expired, the safe can be unlocked using the correct User Code. You may
use the override key to open safe, but keypad will complete the full lockout period.
OVERRIDE ACCESS KEY
If the User Code is unavailable or your keypad fails due to dead batteries or other
malfunction, you can open the safe using the override access key.

REPLACING BATTERIES

Note: The Master Code and User Code will not be erased if weak batteries are
removed and replaced within 10 minutes and no buttons are pressed during the
process of changing the batteries. Otherwise both codes will need to be
reprogrammed.
Weak or dead batteries should be replaced immediately and all 4 batteries should be
changed. To replace the batteries please follow the instructions in STEP 2. in the
SETUP section. Remember to always remove batteries from safe if not using for an
extended period of time. If your batteries are completely dead and you cannot open
the safe by using the digital keypad, use the override access key to open safe and
access the battery compartment.
NOTE: It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries.
IF YOU FORGET THE USER CODE
1. Use the override access key to open safe.
2. With door open, press red reset button (C)
on the inside of door.
3. Yellow light is on; enter new User Code in 15 seconds.
4. Enter User Code (3 to 8 digits) followed by "A" or "B".
5. Safe will beep and yellow light will turn off.
3